Q-Cyber Magazine
Energy systems, industrial security and India's smart-meter ITSAR
Energy operators can combine ISA/IEC 62443 for industrial control systems with a notified Indian security-assurance requirement for smart energy meters, issued by NCCS on 21 April 2025, and with CERT-In's standing incident-reporting duties.

Energy operations sit at the junction of industrial control and a rapidly expanding digital edge: substations, generation controls, and, in the distribution network, large populations of smart meters. The security question is no longer only whether the control room is isolated. It is whether the whole chain has a named standard.
A plant standard and an edge document
62443 gives the operator a way to set a target security level, to demand a secure development lifecycle from product suppliers, and to run a security programme as an asset owner. It is the right language for generation, transmission and distribution control systems, whose lives are long and whose patch windows are short. It is also, by ISA's own account, a horizontal standard intended to work across industrial sectors, including power.
The smart-meter ITSAR is a complementary, India-specific artefact. Meters are mass-deployed, often on public communications paths, and they are a data source as well as a control point. A notified assurance document, with an official number and date, allows a utility or a buyer to require a named baseline in procurement rather than a generic "secure meter" clause. This article does not invent the technical content of ITSAR309052504, and it does not assert an enforcement date that the public NCCS table does not state. It does say that the document exists and should be used.
Exhibit 1
Two public baselines for an Indian energy estate
| Layer | Public baseline | Typical use |
|---|---|---|
| Industrial automation and control | ISA/IEC 62443 series (programme, system, component and supplier-lifecycle parts) | Generation, transmission and distribution control systems; supplier and integrator contracts |
| Smart energy meters | NCCS ITSAR309052504, Smart Energy Meter, V1.0.0, released 21 April 2025 | Procurement, testing and acceptance of metering equipment |
| Incident reporting and evidence | CERT-In directions, 28 April 2022: six-hour reporting, 180-day logs in India | All covered entities in the energy and metering chain |
| Ransomware and restore | CISA #StopRansomware Guide: offline tested backups, golden images, sequenced response | Engineering configurations and the IT systems that sit beside the plant |
Source: ISA, ISA/IEC 62443 series page; NCCS notified ITSAR list; CERT-In, 28 April 2022; CISA #StopRansomware Guide.
Implications
- Use 62443 roles and security levels for control-system design and supplier selection.
- Name ITSAR309052504 in meter procurement, and record any gap if a product cannot be assessed against it.
- Connect reporting and logging so a meter or control-system event can meet the six-hour clock.
- Keep engineering backups offline, and test restore without assuming an office-style recovery.
What this means for critical infrastructure and energy
The energy sector does not lack standards. It lacks, too often, a procurement habit of naming them. A utility that can show a 62443 programme for its controls and a notified ITSAR for its meters is already speaking a language that suppliers, auditors and incident responders can share.


