Q-Cyber Magazine

Critical infrastructure and energy · 11 June 2026 · 3 min read

ISA/IEC 62443: A shared-responsibility standard for industrial systems

The ISA/IEC 62443 series is the consensus international standard for securing industrial automation and control systems across their lifecycle, with defined duties for asset owners, suppliers, integrators and service providers.

Abstract graphic of a grid of circuit traces in Knowlcom blue

Operational technology is not secured by importing an office IT policy onto a plant network. ISA/IEC 62443 exists because industrial automation and control systems have a different lifecycle, a different risk appetite, and a different set of people who must share the duty.

What the series is for

ISA established the ISA99 committee in 2002 to address the cybersecurity of equipment and operations that make up critical infrastructure. The resulting family of standards and technical reports is published by both ISA and IEC, with identical technical content. The ISA editions are numbered ISA-62443-x-y; the IEC editions, IEC 62443-x-y.

The series is organised so that different documents serve different audiences. Asset owners can find security-programme requirements, including the 2024 edition of Part 2-1. Service providers have Part 2-4. System-level risk assessment and security-level requirements sit in Parts 3-2 and 3-3. Product suppliers have secure-development lifecycle requirements in Part 4-1 and component technical requirements in Part 4-2. Patch management in an industrial environment is addressed in a technical report, Part 2-3. The point of this structure is not academic. It is to stop each party assuming that another party has already done the work.

Exhibit 1

Selected parts of the ISA/IEC 62443 series and who they primarily serve

PartTitle focusPrimary audience
ANSI/ISA-62443-2-1-2024Security programme requirements for IACS asset ownersAsset owners / operators
ISA-TR62443-2-3-2015Patch management in the IACS environmentAsset owners and those who maintain running systems
ANSI/ISA-62443-2-4-2018 / IEC 62443-2-4Security programme requirements for IACS service providersService providers
ANSI/ISA-62443-3-2-2020Security risk assessment for system designThose who design and assess systems
ISA-62443-3-3-2013System security requirements and security levelsSystem designers and asset owners setting a target level
ANSI/ISA-62443-4-1-2018Secure product development lifecycle requirementsProduct suppliers
ANSI/ISA-62443-4-2-2018Technical security requirements for IACS componentsProduct suppliers and component certifiers

Source: International Society of Automation, 'ISA/IEC 62443 Series of Standards,' listing of published parts and descriptions. Dates are the edition dates given by ISA.

How an Indian operator should use it

The standard does not replace Indian statutory duties. CERT-In's six-hour incident reporting and 180-day log retention still apply to covered entities, including many operators of industrial and energy systems. 62443 helps those operators decide what "good" looks like in a plant: a risk assessment, a target security level, a supplier development process, and a patch practice that does not assume a weekly reboot window.

Certification schemes exist under the ISASecure mark for components, systems and supplier development processes. They are evidence of conformance to parts of the series. They are not, by themselves, a complete operational programme, and they should not be described as a substitute for sector regulation.

Implications

  1. Assign 62443 roles explicitly: owner, supplier, integrator, service provider.
  2. Start with risk assessment and a target security level (Parts 3-2 and 3-3), not with a tool purchase.
  3. Demand 4-1 and 4-2 evidence from product vendors, and 2-4 discipline from service providers.
  4. Keep CERT-In and sector reporting duties in the same programme.

What this means for critical infrastructure and energy

Energy, process and other industrial operators already have an international language for control-system security. The useful step is to adopt that language in procurement and in the plant security programme, and then to meet Indian reporting duties on top of it. A plant that cannot name its 62443 role, or its target security level, is still improvising.

Sources

  1. ISA/IEC 62443 Series of Standards (ISA)